Description
The 2x4x6 White Boat Fenders offer a long-lasting and reliable means of safeguarding your vessel against dockside collision. Constructed from marine-grade PVC, these sturdy fenders provide a reliable cushion between your boat and the dock, thereby reducing the likelihood of scratches, dents, and costly hull damage. The neutral white finish blends well with most docking areas, while the all-around 6′-long fender suits a wide variety of watercraft and dock setups. For a personal slip or full-service marina, these fenders set the standard for performance and durability.
Key features
Impact-Absorbing Marine-Grade PVC:
Made from stiff and highly durable marine-grade PVC, these fenders absorb heavy impacts and minimize vibrations from wave action, boat movement, or direct collisions with docks. Hence, they are well-suited for both commercial and recreational docks.
Clean, Professional White Finish:
The white color finish applied to the fender gives a clean and polished look, matching most contemporary boats and dock installations. It is formulated against discoloration to maintain its pretty look through time-even the harsh rays of the sun cannot do it any harm.
Flexible Mounting Orientation:
These fenders can be mounted horizontally or vertically to pilings, dock edges, or flat surfaces, accommodating a wide range of docking scenarios and boat sizes.
UV and Saltwater Resistant:
Made to withstand nature’s fury, these fenders are UV-stabilized and resistant to the corrosive action of saltwater, which doubles their service life while maintaining structural integrity throughout the seasons.
Versatile Protection for Different Boats:
Acts as a dependable buffer during docking and gives consistent all-around protection, no matter if you are docking a pontoon, fishing boat, center console, or cruiser.
Additional information
Installation and Use
Mounting is simple with basic hardware (not included). They may be mounted vertically on pilings or horizontally on dock edges. Pre-drilled holes make it fast to install using screws or lag bolts. Install the fender where the boat makes the most contact with the dock so that the wear on the hull is reduced.
Care and Maintenance
Rinse the product immediately with fresh water after exposure to saltwater in order to keep the fenders clean. Tough stains require a mild soap and a soft brush. Do not use an abrasive cleaner as it may ruin the glossy finish. Checking for any wear and making sure the mounts are secure from time to time will help increase the lifespan of the products.
