Description
The Underwater NG 100ft Replacement is a premium replacement cable and lighting system ideal for deep-water installations and dockside use in deeper waters. The unit’s powerful natural green LED light, combined with a 100ft marine-grade cable, will attract fish and provide light in low-light or deeper water conditions. This cable will provide extended reach, durability, and dependable underwater light, whether you are upgrading from an existing system or replacing a light that no longer works.
Key Features
Pure green LED light: Emits an intense 175-watt green glow that penetrates dirty or deep water with ease. Attracts baitfish, predatory species and makes a pretty cool underwater display for you to fish off of or enjoy at your waterfront property.
Long 100-foot cable: Provides flexibility in using the light in deeper water or further away from your power source, especially if you have long docks or piers, or if you have a steep drop-off underwater.
Marine rated: Constructed for the marine environment, the cable and housing are fully sealed and will not corrode. Safe for long-term use in both saltwater and freshwater.
The easiest setup ever: Replacing compatible underwater fish light systems is simple. Plug it in, lower the light to the desired depth, and you’re done. No need to hardwire the light, and you won’t have to worry about the complicated installation of a light fixture.
Flood-style beam: Disperses soft, wide-angle lighting to illuminate large, underwater areas without harsh, glaring light. Perfect for creating that soft glow underwater, or luring marine life into the nighttime spotlight.
Additional Information
Setting up/installing, and utilizing: Simply lower the light into the water using the 100-foot cable and plug it into a 110V outlet protected by a GFCI device. Allow the system to run for 10–15 minutes to start attracting fish. This is ideal for the night on docks, piers, or boats where it’s desired to be placed deeper in the water.
Care and Maintenance: After using the light in seawater, rinse the cable and luminous body with freshwater to reduce the amount of salt. When not in use, store the unit coiled and dry. Each location must be inspected for wear/corrosion/damage prior to use to ensure long-term safety and performance.
